TH | EN
Ultra Bond Adhesive D230

Ideal for bonding heavy objects to all types of surfaces (carries up to 300kg) such as metal, aluminium, plastic, cornices, wood, concrete, composite panels and kitchen accessories.

Features

High Initial Bond Strength
Indoor & Outdoor Use
Filling Gaps & Voids
Moisture Cure Properties
Weather Resistant
Paintable
Heavy Load
Water Resistant
Permanent Bond

Dunlop MS Polymer Ultra Bond Adhesive D230 is a high strength one-component sealant which bonds heavy objects (up to 300 kg) to all types of surfaces. Its specialised formula dries quickly and achieves an extremely strong initial tack within 5 seconds. It is ideal for bonding and sealing in wet, humid conditions, leaves no oil residue and is odourless. It can be painted over with all types of paint including water-based paint. This superior adhesive is also UV-resistant, solvent free and is environmentally friendly.

  • Metal
  • Aluminium
  • Brick
  • Plastic
  • Cornices
  • Concrete
  • Wood
  • Kitchen Accessories
  • Composite Panels

1. Ensure surfaces are free from dust, dirt and grease.

2. Cut tip of nozzle to required angle and bead size.

3. Cut tip of cartridge to open the seal.

4. Screw nozzle onto cartridge and insert into caulking gun.

 5. Apply adhesive with a steady pressure ensuring the adhesive is a minimum of 2-3 mm thick.

6. Bond the substrates firmly together.

7. Adhesive will be dry in 5-10 mins and fully cured within 24 hours.
  • 290 ml
  • Keep out of reach of children.
  • Store in a cool, dry place; away from direct sunlight and sources of heat and ignition.

Data Sheet