LP ECO Gold Adhesive

A premium low VOC, Non-Toluene and low Formaldehyde adhesive ideal for Formica applications.


Excellent Bond Strength
High Initial Bond Strength
High Solid Content
Easy Brush Application
Heat Resistant
Long Open Time
Low VOC Content
Non Toluene
Low Formaldehyde
Fast Drying
No Web
Indoor & Outdoor Use
Permanent Bond

LP ECO GOLD is a low VOC, Non-Toluene and low Formaldehyde premium quality adhesive specifically designed for Formica applications. It has excellent bond strength, high heat resistance and can bond a variety of substrates. Its specialized formula has been carefully designed for Green Building with low VOC and non-toluene requirements.

  • Laminate 
  • Formica 
  • Wood 
  • Cork 
  • Leather
  • U-PVC  
  • Metal
  • Rubber
  • PS 
  • PU Foam
  • Canvas 
  • Concrete 


1. Ensure that surfaces are clean, dry and free from dust, grit, oil and grease.


2. Apply LP Gold Adhesive to both surfaces with a brush or scraper to give a uniform coating.


3. Allow to dry for 7 – 25 minutes according to surface porosity.


4. Apply even pressure to the assembly to ensure uniform bonding.


5. Use Dunlop Thinner (T 559) to remove excess adhesive.


6. Leave to dry for at least 4 hours.
  • 600 Grams                   
  • 3 Kilograms                           
  • 14.8 Kilograms                           
  • 160 Kilograms

Keep out of reach of children. 

Store in a cool, dry place  away from direct sunlight and sources of heat and ignition.

Close the lid tightly after application.

Data Sheet