SB-EPDM Adhesive

A premium strength solvent-based contact adhesive for bonding EPDM and TPO single ply membranes in professional low-slope roofing applications.

Features

DAT SB-EPDM is a premium synthetic rubber adhesive designed for roofing applications. It offers a specialized formulation with easy application and excellent bond strength. It is intended for bonding EPDM and TPO single ply roofing membranes to roof deck substrates in low-slope roofing systems.

  • EPDM
  • TPO
  • Insulation Boards
  • Cover Boards
  • Metal
  • Concrete
  • Plywood
 

 

1. Before and during use, thoroughly stir the adhesive. Do not use electric drills and do not thin the adhesive.
 

 

2. Position the membrane into place and give it enough time to relax in place.
 

 

3. Apply adhesive to membrane and substrate surface, ideally at the same time, using a medium nap roller or adhesive dispenser.
 

 

4. Wait for the adhesive to fully dry and become tacky.
 

 

5. Roll the membrane onto the adhesive-coated substrate and immediately brush with a stiff bristle broom to ensure maximum contact.
 

 

6. Bonded material can be reworked or adjusted using a heat gun.
  • 1 gallon / 3.78 litres
  • 5 gallon / 18.9 litres

Other sizes are available on request

  • Keep out of reach of children.
  • Store in a cool dry place, away from direct sunlight and sources of heat ignition.
  • Store at temperatures between +4oC and +30oC.

Data Sheet