DAT GP Low VOC Adhesive

A low VOC, non-Toluene and low Formaldehyde adhesive suitable for various applications.


GP LOW VOC is a high quality multipurpose adhesive recommended for bonding a variety of substrates such as wood, cork, leather, PVC, PU Foam, carpet, metal and concrete. Its low VOC, non-Toluene and low Formaldehyde properties make it ideal for use in Green Building.  


  • Laminate
  • Formica
  • Wood
  • Cork
  • U-PVC
  • Metal
  • Rubber
  • Leather
  • PS
  • PU Foam
  • Canvas
  • Concrete


1. Ensure that surfaces are clean, dry and free from dust, grit, oil and grease.



2. Apply GP LOW VOC Adhesive to both surfaces with a brush or scraper to give a uniform coating.



3. Allow to dry for 7 – 25 minutes according to surface porosity.



4. Apply even pressure to the assembly to ensure uniform bonding.



5. Use DAT Thinner (T 559) to remove excess adhesive.



6. Leave to dry for at least 4 hours.


  • 600 Grams                              
  • 3 Kilograms                           
  • 12 Kilograms                           
  • 160 Kilograms

Keep out of reach of children.

Store in a cool, dry place; away from direct sunlight and sources of heat and ignition.

Close the lid tightly after application.

Data Sheet