DAT SBR Spray Adhesive

A high quality SBR adhesive suitable for the Furniture Industry.



SP8 styrene block co-polymer is a high quality solvent-based adhesive designed for bonding a variety of substrates. SP8’s specialised formula has been developed with excellent initial bond strength and long tack free time to streamline manufacturing processes.

  • PU Foam
  • Fabric
  • Wood
  • Plywood
  • Leather
  • Laminate
  • Veneer
  • Particle Board
  • Metal Sheet
  • Cardboard
  • Carpet
  • Flexible Foam


1. Ensure that surfaces are clean, dry and free from dust, grit, oil and grease.


2. Apply SP8 Adhesive to 1 or 2 sides using a pressurised spray gun.



3. Allow to dry for 1-45 minutes until touch dry.



4. Apply even pressure to the assembly to ensure uniform bonding.



5.Use DAT Thinner (E123) to remove excess adhesive.




6. Leave to dry for at least 4 hours.



  • 10 Kilograms

Keep out of reach of children. 

Store in a cool, dry place  away from direct sunlight and sources of heat and ignition.

Close the lid tightly after application.

Data Sheet