TH | EN
General Purpose Low Smell Adhesive

A general purpose low smell adhesive, with high initial bond strength, suitable for indoor and outdoor use.

Features

High Bond Strength
High Initial Bond Strength
High Solid Content
Easy Brush Application
Heat Resistant
Long Open Time
Low Smell
Multi-Purpose
Indoor & Outdoor Use
Permanent Bond

GP-LS is a high quality general purpose, low smell, Chloroprene solvent-based adhesive recommended for bonding a variety of substrates such as wood, cork, leather, PVC, PU Foam, carpet, metal and concrete. Its specialised low smell formula is ideal for use in projects with time restrictions and where fast turnarounds are required particularly on interior decoration projects and in the automotive, upholstery and flooring industries. 

  • Laminate
  • Formica 
  • Wood 
  • Cork 
  • Leather 
  • PVC
  • Concrete 
  • PU Foam
  • Flexible Foam
  • Metal

 

1. Ensure that surfaces are clean, dry and free from dust, grit, oil and grease.

 

2. Apply GP Low smell Adhesive to both surfaces with a brush or scraper to give a uniform coating.

 

3. Allow to dry for 7 – 25 minutes according to surface porosity.

 

4. Apply even pressure to the assembly to ensure uniform bonding.

 

5. Use Dunlop Thinner (T 559) to remove excess adhesive.

 

6. Leave to dry for at least 4 hours.
  • 600 Grams                   
  • 3 Kilograms                           
  • 14.8 Kilograms                           
  •  160 Kilograms

Keep out of reach of children. 

Store in a cool, dry place  away from direct sunlight and sources of heat and ignition.

Close the lid tightly after application.

Data Sheet